DuraLabel 9000 User's Guide download pdf (Page 21)

800.788.5572 DuraLabel.com

CONFIGURING PRINTER DRIVERS

6. Conguring Printer Drivers

Perform the driver conguration before opening the document you

plan to print or close any documents you currently have open before making these

changes.

A. Click Start > Devices and Printers*. A Devices, Printers and Faxes window

appears.

*NOTE: If you do not nd Devices and Printers in your Start menu, you can access

it in your Control Panel.

B. Right-click the Graphic Products DuraLabel 9000 icon and select Printing

preferences. A Printing Preferences dialog box appears.

C. Click the Page Setup tab and select Landscape or Portrait, depending on your

label’s orientation.

D. If your label size is not shown in the Stock Name

drop-down menu, click Edit and set the size to match

your label size.

NOTE: Your DuraLabel 9000 printer drivers are preset

to several print values. Please be aware that changing

a preset value is not fully supported by all software

programs. For best results, make changes to preset

values from the Devices and Printers window.

6.1 Continuous Vinyl Printing Instructions

Your printer driver has been preset to common settings to reduce the steps needed

to set them manually. You can change your settings by following these steps:

A. Select the Stock tab, then select Continuous from the Type drop-down menu

under “Media Settings.”

B. To cut after each label, select Cut from the Post-Print Action drop-down menu

and select After Every Page from the Occurrence drop-down menu.

C. To cut after each job, select Cut from the Post-Print Action drop-down menu and

select After Job from the Occurrence drop-down menu.

D. Click Apply.

FIGURE 1 Printing Preferences dialog

box with Page Setup tab selected

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

No comments

DuraLabel 9000 User's Guide Page 21